Add up the dressed rider, retained equipment and actual packed game, then apply the definitions in the exact manufacturer’s instructions. This guide compares published wording and an illustrative calculation; we have not ridden or loaded these products. Manufacturer specifications checked November 10, 2026.
Three maker wordings that lead to different questions
Do not subtract your weight until you know what the rating includes. The heavier-rider guide explains rider, payload and gross/system limits in detail. These hunting-bike pages show why that distinction matters.
| Exact bike | Current published wording | What remains to confirm |
|---|---|---|
| QuietKat Ranger XR | 325 lb (147 kg) listed load capacity; the same specification lists 100 lb (45 kg) on the rear rack. | Ask QuietKat whether the capacity includes the bicycle and whether a separate rider limit applies. Check the rack rating separately. |
| Bakcou Mule SD | The FAQ says it is rated for riders up to 350 lb (159 kg), “plus gear.” | This wording does not quantify the additional gear allowance or establish a 350 lb (159 kg) cargo allowance. Ask Bakcou how much gear the exact setup can carry. |
| Bakcou Mule Jäger SD | The FAQ instead describes approximately 350 lb (159 kg) of rider and gear. | The FAQ groups rider and gear under the same approximate figure. Bakcou uses different wording on the Mule SD page above, so confirm the definition for the exact model. |
Ask the maker to define any unclear rating before using it in your load calculation.
Worked example: the rack runs out before the bike
Hypothetical setup. The example bike has a 300 lb (136 kg) rider-and-cargo allowance and a separate 50 lb (23 kg) rear-rack limit. The gear inventory includes all installed equipment counted by the assumed manual.
| Input or calculation | Illustrative amount |
|---|---|
| Dressed rider | 190 lb (86 kg) |
| All retained gear, including bags and straps | 44 lb (20 kg); 14 lb (6 kg) on the rack and 30 lb (14 kg) carried elsewhere |
| Rider plus retained gear | 234 lb (106 kg) |
| Remaining under the assumed bike allowance | 300 − 234 = 66 lb (30 kg) |
| Remaining on the assumed rack | 50 − 14 = 36 lb (16 kg) |
The rack limits the additional load to 36 lb (16 kg) in this example. Check whether a bag, mount, wheel or another component sets a lower limit on your setup.
If the real manual’s limit includes the bicycle, account for the bicycle as instructed. If the load definition is unresolved, this example cannot settle it. Weigh complete bags and installed equipment consistently so the same item is neither omitted nor counted twice.
Game carts: use the bike-mode rating
Rambo’s Aluminum Bike Game / Hand Cart lists 300 lb (136 kg) for hand-cart use but a maximum 70 lb (32 kg) load when connected to a bike. Rambo excludes the R350JR, R350JR G3 and The Rooster. The maker requires the R150 G2 rack when installing this cart on a Rambo bike without a rear rack.
Check the exact bicycle’s towing permission and the cart’s installation instructions independently. A matching brand name or a physically fitting hitch does not resolve all load limits. Our trailer fit and load guide covers that process.
| Accessory example | Published load information | How to use it |
|---|---|---|
| QuietKat two-wheel All-Terrain Game Trailer | 100 lb (45 kg) load capacity; the trailer’s own listed weight is 38 lb (17 kg). | The capacity is not permission to add that amount to the bicycle’s own allowance. Confirm how the bike maker counts the trailer and connection loads, and follow the exact combination’s instructions. |
| Bakcou Folding Cargo eBike Trailer | 150–200 lb (68–91 kg) capacity, depending on trail; trailer weight 42 lb (19 kg). | The page qualifies its range by trail conditions. It does not provide a numerical terrain formula that lets us assign the upper figure to your route. |
| Eunorau two-wheel hunting trailer | The pounds entry converts to 200 lb (91 kg). The metric entry converts to about 220 lb (100 kg). | Obtain a corrected specification before relying on either limit. Check the model exclusions and hitch instructions on the product page. |
Ask the bike maker how to count the loaded trailer and the force at the hitch. Record those instructions alongside the cart’s bike-mode limit.
Historical meat weights give scale, not a trip count
Two University of Wyoming bulletins published in August 2003 report laboratory processing of hunter-harvested animals. Each study used six males and six females of its species; the carcasses were split and aged before processing. Their Table 2 values below are small historical sample averages for boneless material, not weights for a whole animal, individual quarter or freshly packed bag.
| Historical group | Reported boneless mean | Primary source |
|---|---|---|
| Bull elk, six animals | 218 lb (99 kg) boneless lean | B-594R, Table 2, page 3 |
| Cow elk, six animals | 169 lb (77 kg) boneless lean | Same elk study and table |
| Mule-deer bucks, six animals | 54.6 lb (25 kg) boneless cuts | B-589R, Table 2, page 3 |
| Mule-deer does, six animals | 44.4 lb (20 kg) boneless cuts | Same mule-deer study and table |
The bulletins describe variation with the animal, trimming and processing. Do not divide an average by a headline bike rating to promise a trip count. Bones, packaging and other retained items change the actual transported load; weigh the packed load and compare every applicable limit.
A load record for the exact trip
- Bike: model, year, configuration, manual and the maker’s complete rider/payload/system definitions.
- Inventory: dressed rider, installed equipment, bags, straps, water, tools, spare battery and actual game load, using the inclusion rules above.
- Location: what is on the rider, on each rack and inside the cart. Check each carrier’s limit as well as the bicycle’s.
- Towing: approved bicycle/cart combination, operating mode, connection restrictions and instructions for how to count its load.
- Route: current permission for the bike, hunting use and any off-route retrieval. Begin with the public-land hunting access guide to check riding and retrieval separately.
Keep the original units and unrounded calculations in your record. The bracketed kilograms here are rounded references. If a maker leaves a definition, compatibility requirement or conversion unresolved, obtain the missing instruction before treating a calculated remainder as usable capacity.
Frequently asked questions
Can I use a game cart’s hand-pulling rating behind my bike?
Use the bike-mode rating. For the Rambo cart in this guide, that is 70 lb (32 kg). Check the listed model exclusions and rack requirement before installation.
Does the bike’s remaining payload tell me how much meat can go on the rear rack?
Check the bike and rack separately. Subtract gear already on the rack from its own rating. Use the smaller remainder for a load placed entirely on that rack, subject to any lower component limit.
How many trips will an elk require?
The historical study averages here cannot establish that. Weigh the actual packed loads and apply every relevant bike, rack, cart and connection restriction, along with route and use conditions.
